Category: *UNSORTED

Stator rotor shims for shovelhead

images stator rotor shims for shovelhead

Using a dial caliper, measure the distance from the straight edge to the primary chain as close to the clutch as possible with the chain pushed all the way in. Includes performance alternator rotor. But I could wrong I have never messed with a These systems are the perfect choice when building a bike or when upgrading a weaker charging system. Harley NOS p aermacchi charging system. Fits Big Twin models Replaces OEM

  • Stator rotor spacer Club Chopper Forums
  • Installation Instructions
  • W&W Cycles Electrical > Accel Charging System for Shovelhead and Evolution
  • W&W Cycles Electrical > Stator Plug Retainer for Big Twin Stators
  • W&W Cycles Electrical > Shim Kit for Big Twin Rotors

  • Stator rotor spacer Club Chopper Forums

    On and later big twins the case is machined deeper to make room for the thicker 32 amp stator. This shim kit replaces the stock rotor shims when installing.

    images stator rotor shims for shovelhead

    Evo Classic Models - spacer between rotor and stator - My manual shows the spacer behind the rotor halfway on the splines of the drive shaft. 7) Remove rotor and all spacers under rotor.

    Installation Instructions

    Note: It may be necessary to remove the inner primary on earlier models. 8) Unplug regulator from stator.
    Note: After several thousand miles it may be possible to remove the compensator sprocket and chain adjustor shoe without removing the clutch.

    In my motor it is in this same location but it is stationary. Advertising ClubChopper. If you do a search you will get different answers and it all depens on what you are using.

    images stator rotor shims for shovelhead

    Browse Related Browse Related. Where is it supposed to ride on the shaft?

    images stator rotor shims for shovelhead
    Stator rotor shims for shovelhead
    Quick Reply: spacer between rotor and stator.

    Large one outside the rotor Push in until terminal snaps in. Includes Heavy duty stator wound with high temperature wire, heavy duty sealed magnet rotor 4 stator mounting bolts and spacers if needed.

    Main Menu.

    Video: Stator rotor shims for shovelhead Shovelhead Primary Complete Tear Down 66-E84 4 speeds with chain Primary

    Be sure wires are not in the very bottom of lower frame or they will get pinched if you bottom out. Subtract B from A and note this C.

    here's my question: can I use the stock alt.

    W&W Cycles Electrical > Accel Charging System for Shovelhead and Evolution

    rotor from my shovelhead with the and is flat but comes with two shims that i'm assuming space the. I got my 32 amp charging stator and rotor today.I was wondering if I needed the Stator rotor spacer Bike Year, Make, Engine: Harley Custom Bobber 80" Evo.

    This kit includes a rotor, regulator, stator, and hardware. Features standard spline rotor with two rotor spacers.

    W&W Cycles Electrical > Stator Plug Retainer for Big Twin Stators

    New 32 Amp Charging System by Mid-USA.
    Find all posts by 92Fatty. Install stator wires into plug housing. Can be used on 22 amp or 32 amp charging systems.

    Video: Stator rotor shims for shovelhead 1977 Shovelhead: Oil Leak and Alternator Sound Fixed

    Note: After several thousand miles it may be possible to remove the compensator sprocket and chain adjustor shoe without removing the clutch. I want to register an account for free right now!

    W&W Cycles Electrical > Shim Kit for Big Twin Rotors

    images stator rotor shims for shovelhead
    Stator rotor shims for shovelhead
    Register now for free! Push in until terminal snaps in.

    Likes: 1. Forum Rules. About Harley Stator Rotors Shop the extensive inventory of motors, parts, and accessories and other motorcycle accessories for Harley Davidson motorcycles!

    1 comments

    1. Vokus:

      Fits Harley Davidson to